Australia. CPD guide.

Engineers Australia CPD requirements, in plain words

Engineers Australia asks Chartered engineers and NER registrants to complete at least 150 hours of continuing professional development (CPD) every three years. This guide sets out the rules, what counts and how to log your hours.

  • Who it's for

    Chartered engineers, NER registrants and the managers who plan their team's development.

  • Inside

    The hours, what counts, the business and risk management hours, how to log them, and the state schemes.

  • Important note

    This guide explains Engineers Australia's CPD Policy v2.1 in plain words. It is not formal advice. Engineers Australia decides what it accepts at audit.

The basics

What Engineers Australia requires

The rules apply to Chartered members and engineers on the National Engineering Register (NER). You need at least 150 hours of CPD over three years. The rest of your hours go on activities relevant to your career. If you worked under 24 hours a week over the past three years, your CPD period extends to five years. The same applies if you took a career break of 6 months to under 5 years. You apply for a career break during an audit.

Three areas carry a minimum inside those 150 hours.

Your area of practice

  • At least 50 hours
  • Per area, if you practise in more than one

Risk management

  • At least 10 hours
  • Technical risk and people risk

Business and management skills

  • At least 15 hours
  • Leading people, communication, coaching, conflict and winning work
Engineers Australia CPD and state registration
State registration

Queensland, Victoria and NSW add their own rules

Some states run their own registration for professional engineers, with their own CPD rules. Queensland (RPEQ): 150 hours over three years, at least 75% technical and no more than 25% non-technical, including at least 1 hour on ethics. Updated policy in force from 1 July 2026. Check the Board of Professional Engineers of Queensland for details. Victoria (Professional Engineers Registration Act 2019): 150 hours over three years full time, or 90 hours part time, with at least 33% technical. Caps match Engineers Australia's closely. NSW (Design and Building Practitioners Act 2020): registered engineers complete CPD every year. Members of a body with an approved CPD scheme, such as Engineers Australia, can meet it that way. Check the NSW guidelines for the hours.

  • Chartered
  • NER
  • RPEQ
  • Victoria
  • NSW

Definition CPD

Continuing professional development. The learning engineers do and log through their career to keep their competence current.

How to log

How to log your hours

Engineers Australia gives you an online CPD log. Use it for every activity, in four steps.

  1. Log in

    Log in to the member portal. Open the MyEA tile and choose “Record CPD”.

  2. Add each activity

    Record the date, provider, topic, hours and CPD type, and tag the hours as area of practice, risk management or business and management.

  3. Keep your evidence

    Save certificates, agendas and notes. For private study, keep the date, title, author and time spent.

  4. Expect an audit

    Engineers Australia audits on a five-year cycle and may audit more often. If it selects you, you get an email with a link to submit your record.

If you can't use the online log, Engineers Australia sends an Excel template with the audit notice. It accepts no other format.

Business and management

15 hours

The minimum business and management CPD every three years.

Source: Engineers Australia CPD Policy v2.1, January 2025.

Risk management

The risk management hours

You need at least 10 hours of risk management every three years. Technical risk comes to mind first: design, safety in design, project risk. People risk can count too. Every Australian state and territory now has psychosocial hazard duties in its workplace safety law. Training that helps managers identify and control psychosocial risks can fit here. Keep the course outline as evidence.

What counts

The eight types of CPD

Engineers Australia recognises eight types of CPD. Each has its own conditions, and some have a cap.

Engineers Australia CPD types, what each covers and the cap over three years
Type What it covers Cap over 3 years
Type I Tertiary courses No cap
Type II Short courses, workshops, seminars, webinars, discussion groups, conferences No cap
Type III Workplace learning that extends your competence (normal work doesn't count) 75 hours
Type IV Private study, such as reading Engineers Australia's magazine 18 hours for magazine and digital offerings; types III and IV together 110 hours
Type V Service to the profession, including mentoring colleagues 50 hours
Type VI Preparing or presenting course or conference material, writing papers 45 hours per paper; 75 per peer-reviewed paper
Type VII Industry involvement for tertiary teaching or research staff At least 40 hours
Type VIII Other structured activity, with evidence and a reason As justified

Leadership and management workshops sit in Type II, which has no cap. We checked these rules against Engineers Australia's CPD Policy v2.1 and CPD Types and Conditions (January 2025) on 8 October 2026. Check Engineers Australia's site for the current version before you act.

Where managers come in

The business and management hours

You need at least 15 hours of business and management skills every three years. Leading people, communication, coaching, conflict and winning work all sit in this area. Managers who plan their team's development can use these checks too. Keep your evidence for every activity, in case Engineers Australia selects you for an audit.

Business and management CPD hours for engineers

Check each activity before you log it

  1. CPD type

    A structured workshop or short course fits Type II, which has no cap.

  2. Topic

    The content builds business or management skills.

  3. Tag

    You tag the hours as business and management in your log.

  4. Evidence

    A certificate or agenda with the date, hours, provider and topics.

You decide how to record your hours. Engineers Australia decides what it accepts at audit.

Awareness training covers what a hazard is. Leaders also need practice in the conversations and decisions that control the risk day to day. Our programs focus there.

Leadership insight

Where leadership development fits

The business and management hours cover leading people, communication, coaching, conflict and winning work. We build those leadership and management skills with engineering teams across APAC, the UK and Europe.
Every program follows the Authenticity Cycle. Simulations and The GreyScale profile reveal and explain how a leader behaves under pressure. Programs then develop new habits on your own projects, through workshops, coaching and Learning Academies that run online, instructor-led or blended.

Note

Engineers Australia has not accredited our programs. You choose and log your own CPD hours.

How the Authenticity Cycle works
Three phases, one continuous practice. You keep practising authenticity like any other discipline.
How we help

Leadership and management skills for engineers

We help engineering firms build the leadership and management skills that Engineers Australia's business and management area describes.

  • New engineering leaders in a development session
    New leaders

    From Accidental to Authentic

    For engineers in their first years of leading people, who may have been promoted on technical merit.

    Ask about the program
  • Coaching for Performance session
    Coaching

    Coaching for Performance

    So managers coach people toward accountability.

    Ask about coaching
  • Engineers preparing to win client work
    Winning work

    Winning and Retaining Business

    For technical people who must win and keep work.

    Ask about winning work
  • Team working through a leadership simulation
    Simulations

    Leadership simulations

    That show how teams behave under pressure.

    Ask about simulations

Engineers Australia members choose and log their own CPD hours. Ask us how a session fits your plan.

Talk to us about your engineers

Our programs carry no Engineers Australia CPD accreditation.

Engineers Australia CPD questions

How many CPD hours does Engineers Australia require?

At least 150 hours every three years for Chartered members and NER registrants. That includes at least 50 hours in your area of practice, 10 in risk management and 15 in business and management skills.

Does leadership training count as CPD for engineers?

It can. Structured leadership and management workshops fit Type II CPD, which has no cap, and can help cover the 15 hours of business and management skills. Engineers Australia decides what it accepts at audit.

Does psychosocial safety leadership count as risk management CPD?

It can, when it teaches you to identify, assess and control psychosocial risks at work, because managing those risks is a legal duty. Record it as risk management and keep the course outline as evidence.

How leaders affect psychosocial safety

How do I record CPD with Engineers Australia?

Use the online CPD log in the member portal: open the MyEA tile and choose “Record CPD”. Add the date, provider, topic, hours and type for each activity, and keep your evidence.

How often does Engineers Australia audit CPD?

Engineers Australia runs a five-year audit and practice review cycle, so expect at least one audit in that time. It can audit more often.

Does mentoring count as CPD?

Mentoring colleagues counts as Type V, service to the profession, up to 50 hours over three years.

Ready to lead as yourself?

Tell us where your leaders are stuck. We'll tell you honestly whether we can help.